Equipment for fusing of thermoplastics,
trademark ELGIMAQ ®, mod. EGM-RBF-XXXL, destined to manual demarcation
of traffic signs.
I - DESCRIPTION:
Projected
for preparation (fusing) of thermoplastics, for application
and manual demarcation of traffic signs through the accessory
for hand guided application (extrusion).
The set is projected to be assembled on a tow with
capacity of 1,500 kg, that forms the set of tow/fusor, capable to
be carried (towed) by utilitarian vehicles, or trucks of small size.
Optionally, this set also can be assembled on a
metalic base in table form, to be carried in the platform from utilitarian
vehicles or truck of small size, being that in this last one, it
is possible to increaser the capacity of the fuser up to 500 liters
(1.000 kgs), extending the autonomy of the application.
II - TECHNICAL FEATURES:
We will divide these features in two parts, to knowing:
TOW:
1. Structure constructed in plates of steel, submitted
to an anticorrosive handling and painting of finishing in the color
orange, with hook of easy adaptation to any I propagate (utilitarian
or truck).
2. Suspension with beams of springs, axles of wheels with tires
and air chambers.
3. Hydraulical Brakes, mechanical brakes of the type Mercedes Benz
4. Electrical System de12 volts, with indicative lanterns.
Wheels 700X16
Length 4,50 m
Width 1,670 m
Height 0,95 m
FUSER :
1.
Vertical Cylindrical Tank with capacity for 500 kg/250 liters
to 1.000 kg/500 liters of thermoplastic, thermally isolated
with wool of glass and equipped with thermometer.
2. Hydraulical Beater drive with variable rotation, shovels
that scrape the wall of the tank, agitating the material in
contained it.
3. Outputs two with Ø of 4", with adjustable valves, lever
of the type guillotine, facilitating the dump of the material.
4. Hydraulical System for drive of the beater, made up of a
tank with capacity for 40 liters of hydraulical oil, equipped
with finder of level, internal filter of suction, compatible
bomb and engine, valve of outflow control and hoses of measured
pressure for circulation of the fluid.
5.
Engine to diesel of up to 7.5 HP for drive of the hydraulical
system, with electric start and 12 battery volts.
6. System of Heating with two burners to the gas (GLP), using
up to 2 cylinders of 45 kg, and appropriate hose. Optionally,
we can have this equipment configured with a burner to diesel,
of high being able of heating, also substituting the gas cylinders,
for appropriate tank.
III - GENERAL CONSIDERATIONS:
* The engineering of the components used are strictly
under the standards and patterns of the Technical Rules Brazilian
Association (ABNT); however, we can analyze the possibility of building
the equipment under the patterns of the country in which it will
be worked on.
* Modifications concerning the capacity or lay-out of the original
project can possibly be made, as long as with previous consultation
and further cost evaluation.
The products that we are offering are registered with patent required in the National Institute of Propriedade Industrial (I.N.P.I.), and its partial or total reproduction, of the concepts or the design, are protected by the Federal Law nº 9.279 of 14 of May of 1996 that it regulates the relative rights and obligations to the industrial property.
Elgimaq News:
New device for painting metal fenders
and new jersey for cold painting, vertical, paint gun and glass
beads. Suitable for painting the fender installed on the highway.
ELGIMAQ
Indústria e Comércio Ltda.
Av. Anibal Benévolo 266 - Chacaras Rio Petrópolis
Duque de Caxias - RJ - Brasil - CEP: 25.231-120